Just finished up the work from yesterday on the channel cut into the main gear for the brake lines. I filled a few spots where the router bit hit the edge of the channel with some fiberglass epoxy and primed it. Not perfect but looks good. When the brake line goes in it will look even better. I also found these polyester UV resistant clamps that would be good to use on the top and bottom of the gear to hold the brake line. The RTV will hold the line in fine along the back of the gear, but it may not be enough to hold it where it makes the bend into the brake caliber and at the top where it bends into the fuselage. I guess I’ll have to see when the time comes for that.
Now to cook some turkey.