More Connector Wiring

Time 2.5 hrs

Well the heat shrink labels came today so I was able to finish the connectors that I had stated to wire up the day before. 


Control stick wires labeled and pinned. 


Control stick pins in the connector. 


And finally the TE mini CPC connector mounted under the control stick. The gribs will have the female side of the connector on the pigtail. If I ever have to remove a control stick then I just de-pin the connector and pull the pigtail wires back through the control stick. 


I also wired up the connectors and VOR coax on the tail cone. 

Advertisements