Grommet Edging for Rear Fuselage Ribs

Time: 1.5 hrs

Things done today:

  • Drilled out a few rivers on the tail cone/rear fuselage skin area to 4mm
  • Installed edge grommet on ribs where wiring passes through

This was suggested by Jean. He said that sometimes even if the wiring is wire tied it will rub on the edges of the ribs. I went through and installed a small piece of edge grommet on all these areas… maybe 10 or so. I wish I would have thought of this before the bottom skins were on… boy what a pain to do this now.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s