Service Bulletin #0010

Received Service Bulletin #0010 from TAF today for Rib 601 in the tail cone. It basically says if your have a Rib 601 with aluminum of 0.64mm in thickness then you have to do annual inspections of this part and not in your airframe log book. If you have 0.8mm then you’re OK. Fortunately it look sleek I have 0.80mm material there so I should be OK, even though the materials list in the kit shows it as 0.64mm. I’ll just have to remember to log in in the airframe log book when I get one.

img_3249

Held tight on the material. Also measured in a few places and all come out to 0.8mm

Advertisements

One thought on “Service Bulletin #0010

  1. Pingback: Short Elevator Tube and Spar Spacers | Jim's Sling 4 Build Log

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s