Things done today:
- Deriveted glove box top and changed a few rivets around
- Rebent flanges on side fuselage skin (Left)
I’m going to put some liner material in the glove box so to make things easier I deriveted the top part. I also reversed 4 rivets so that the surface is flat inside so the liner sits better.
Well relaxing the bend seems dot work. The flange fits much better now. So glad this worked.
Looking forward this is the join between the side skin (SKN-001) and the front bottom skin (SKN-004).
This is looking aft. This is the join between the side skin (SKN-001) and the rear bottom skin (SKN-002). Still needs a little tweaking, but so much better.