More prep work on rear fuselage ribs

Time: 8.25 hrs

Put in some time today finishing up the deburing of the large ribs for the rear fuselage section. I noticed a couple of holes that weren’t drilled through on rib 2. This was were the angle piece attaches to the main rib. It was pretty easy to center punch, drill a pilot hole and then just use the reamer to enlarge the hole… seems to match up well.

IMG_2386

Looks like this should continue through. The plans also show a hole all the way through.

 

IMG_2387

Drilled and deburred. Did the same on the other side.

 

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s