VOR antenna

Time: 1.25 hrs

Drilled out and filed the holes in the VS skins for the VOR antenna elements. I used a hole punch to punch a hole through some masking tape and used that on the VS rib so that I had a rough idea of where the hole needed to go. I then clecoed to skin to the frame and marked the holes and then did the same for the other side. After a bit of filing I finally got the antenna elements to fit.

 

IMG_1646

Hole punch and masking tape

IMG_1647

IMG_1644

IMG_1645

That should get me close to the correct size hole to drill out

IMG_1651

Skin clecoed and marked

IMG_1649

IMG_1660

Allen key hole lines up and antenna element fits

IMG_1661

Still needs a little clean up.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s